Sony HCD-C450 - Manual (Page 34)

34 GB
Resuming Playback from
the Point Where You
Stopped the Disc
(Resume Play)
When you stop the disc, the system
remembers the point where you pressed x
and “RESUME” appears on the front panel
display. As long as you do not open the disc
tray, Resume Play will work even if the
system enters standby mode by pressing 1.
1
While playing a disc, press x to
stop playback.
“RESUME” appears on the front panel
display, so you can restart the disc
from the point where you stopped the
disc.
If “RESUME” does not appear,
Resume Play is not available.
2
Press H.
The system starts playback from the
point where you stopped the disc in
Step 1.
H x
1 2 3
4 5 6
7
>10 10/0
8 9
1
z To play from the beginning of the disc, press x
twice, then press H.
Notes
• Depending on where you stopped the disc, the
system may not resume playback from exactly the
same point.
• The point where you stopped playing is cleared
when:
– you turn the power off by pressing POWER on
the system.
– you change the play mode.