Sony PCV-V200G - Manual (Page 49)

Installing Memory
49
Installing a memory module
1 Remove the memory module from its anti-static package, handling it by the
edges.
2 Locate the center notch on the bottom edge of the memory module and align
it to the center notch in the open module slot.
3 Firmly insert the bottom edge of the module into the slot by pressing down
evenly against the module’s upper corners.
The side latches snap into position, holding the memory module in place.
Installing a memory module
To avoid damaging a memory module or the memory module slot, move the
side latches slightly outward to relieve pressure. The module is properly
inserted when the side latches click into place.
Memory module
Module slot
(open)
Side latch
Center notch