Sony PCV-V200G - Manual (Page 53)

53
Troubleshooting bleshooting
This section describes how to troubleshoot common problems. For
information on other troubleshooting topics, see the online VAIO®
Computer User Guide.
My computer does not start.
❑ Verify that the computer is plugged into a power source and that it is turned
on. Check that the power indicator is lit on the front panel of the computer.
❑ Confirm that a disk is not in the floppy disk drive * (unless you are using a
bootable floppy disk).
❑ Confirm that a CD is not in an optical drive (unless you are using a bootable
CD).
❑ Confirm that the power cord and all cables are connected firmly.
❑ If you plugged the computer into a power strip or Uninterruptible Power
Supply (UPS), make sure the power strip or UPS is turned on and working.
❑ Verify that the monitor is plugged into a power source and turned on.
If your system has a built-in monitor, confirm that it is plugged into an
appropriate power source and that the system is turned on.
❑ Verify that the brightness or contrast control dials are adjusted correctly. (See
the manual supplied with your display for details.)
❑ Confirm that the computer is not in Stand by mode by pressing the Stand by
key, located at the top of keyboard.
* Certain VAIO computers are not equipped with a floppy disk drive. You can purchase this
equipment separately.