Sony MZ-NF810 - Manual (Page 29)

29
On the remote control
1
Press DISPLAY.
Each time you press the button, the
display changes as follows:
Display window on the remote control
Display: C / D
Note
Depending on whether the group function is
used or not, the operating conditions, and the
disc settings, you may not be able to select
certain indications or the indications may
appear differently.
z
For more details about the indications in the
display while playing, see “Viewing various
information” (page 35).
To start/stop recording
in sync with the sound
source
(Synchro-recording)
During synchro-recording, the recorder
starts and stops recording in sync with the
sound source. When recording from
digital equipment (such as a CD player),
you can omit operating both the recorder
and the sound source, and easily make
digital recording. You can make synchro-
recording only when the optical cable is
connected.
1
Make connections.
Use the appropriate optical cable to
suit the source equipment. Connect
the cable firmly to the appropriate
jacks.
2
While the recorder is stopped, press
MENU.
3
Press . or > repeatedly until
“REC SET” appears in the display,
and then press ENTER.
4
Press . or > repeatedly until
“SYNC REC” appears in the display,
and then press ENTER.
5
Press . or > repeatedly until
“SYNC ON” appears in the display,
and then press ENTER.
C D
Track number Elapsed time
Track number Track name
The number of
the track in the
group Group name
The number of
tracks in the disc Disc name
Track number The name of the
sound mode
C D
MENU
REC x
5-way control key
(ENTER, ., >)
continued