Sony MZ-NF810 - Manual (Page 61)

61
Turning off the beep sound
You can set the beep so that it is not
emitted when the recorder and the remote
control are operated.
1
Enter the menu and select “OPTION”
- “BEEP”.
2
Select “BEEP OFF”.
To turn on the beep sound
Select “BEEP ON”.
Recording without
overwriting existing material
If you wish to avoid recording over the
current contents of an MD, do the
following procedure. All new material
will then be recorded from the end of the
current contents. The recorder is factory
set to record over existing material.
This function can be set with the recorder
only.
1
Enter the menu and select “OPTION”
- “REC-Posi”.
2
Select “From End”.
To start recording over the
current contents
Select “From Here”.
z
• To temporarily record without recording over
the current contents, press END SEARCH
before the start of recording. The recording
will begin after the last track, even if “REC-
Posi” is set to “From Here” (factory setting).
The remaining recordable time on the disc
will appear in the display when you press
END SEARCH.
• If the group recording setting (“ : REC”) is
set to “ : REC ON”, the recorder will
always set to “From End”.
Creating a new group when
recording
By sliding REC, you can set the recorder
to create a new group automatically each
time you record. This is convenient when
recording several CDs in succession.
This function can be set with the recorder
only.
1
While the recorder is stopped, enter
the menu and select “REC SET” -
“
: REC”.
2
Select “ : REC ON”.
To turn the setting to normal
Select “ : REC OFF”