Sony MZ-NF810 - Manual (Page 64)

64
Selecting the sound quality (6-
Band Equalizer)
1
While playing, enter the menu and
select “SOUND” - “SOUND EQ”.
2
Press . or > repeatedly to
select the SOUND mode.
Each time you press . or >, A
and B change as follows:
3
Press ENTER to enter the selection.
To cancel the setting
Select “SOUND OFF” in step 1.
To modify and store your sound
1 During playback, enter the menu and select
“SOUND” - “SOUND EQ” - “CUSTOM1”
or “CUSTOM2”.
2 Press . or > to select the frequency.
3 Press VOL+, – to adjust the level.
4 Repeat steps 2 and 3 to adjust the level for
each frequency.
5 Press ENTER.
For details and the remote control
operation, see page 37.
Starting the playback quickly
(Quick Mode)
After pressing the playback button or
cueing to the track, the playback can start
quickly.
1
Enter the menu and select “OPTION”
- “PowerMode”.
2
Select “QUICK”.
To switch back to the normal
setting
Select “NORMAL” in step 2.
A B
HEAVY SOUND H
POPS SOUND P
JAZZ SOUND J
UNIQUE SOUND U
CUSTOM1 SOUND 1
CUSTOM2 SOUND 2
Frequency (100 Hz)
From the left, you can select 100 Hz,
250 Hz, 630 Hz, 1.6kHz, 4 kHz, 10 kHz
Level (+10 dB)
You can select from among seven levels.
–10 dB, –6 dB, –3 dB, 0 dB, +3 dB, +6 dB,
+10 dB
Display window on the recorder
Display window on the remote control