Adding track marks while recording, Adding track marks manually, Adding track marks automatically (auto time mark) – Sony MZ-NF810 User Manual

Page 33: 33 adding track marks while recording

Advertising
background image

33

Adding track marks
while recording

You can add track marks (track number)
while recording.

Adding track marks manually

1

While the recorder is recording, press
T MARK (press P-MODE/

on the

remote control).

Adding track marks
automatically (Auto Time
Mark)

Use this feature to add track marks
automatically at specified intervals when
recording through the analog input
connector or a microphone. This function
is convenient for recording long period of
time, such as lectures, meetings, etc.

1

While the recorder is recording or in
recording pause, press MENU.

2

Press . or > repeatedly “REC
SET” appears in the display, and then
press ENTER.

3

Press . or > repeatedly “TIME
MARK” appears in the display, and
then press ENTER.

“MARK OFF” appears in the display.

4

Press > to show “MARK ON” in
the display, and then press ENTER.

5

Press . or > repeatedly until
the desired time interval appears in
the display, and then press ENTER.

Pressing . or > changes the
time setting (Time:) by 1 minute,
within the range of 1 to 99 minutes.

To cancel Auto Time Mark

Select “MARK OFF” in step 4 or stop
recording.

Using Auto Time Mark to add
track marks while recording

When the elapsed recording time
exceeds the time interval for Auto
Time Mark:

The recorder adds track marks at the point
you set the time interval and from that
point the recorder adds a track mark
whenever the time interval has elapsed.

Example: Eight minutes of recording has
been completed when the Auto Time
Mark time interval is set to 5 minutes.
A track mark will be added at the 8-
minute point (after the start of recording)
and after each 5-minute interval
thereafter.

When the time interval set for Auto
Time Mark exceeds the elapsed
recording time:

The recorder adds track marks when the
set Auto Time Mark time interval has
elapsed.

Example: Three minutes of recording has
been completed when the Auto Time
Mark time interval is set to 5 minutes.
A track mark will be added at the 5-
minute point (after the start of recording)
and after each 5-minute interval
thereafter.

z

“T” appears after the track display on the
recorder for track marks added by Auto Time
Mark, and “T” appears before the time display
on the remote control.

MENU

T MARK

X

5-way control key (ENTER, ., >)

Advertising
This manual is related to the following products: