Sony MZ-NF810 - Manual (Page 38)

38
3
Slide the jog lever repeatedly to select
the surround mode.
Each time you slide the jog lever, A
and B change as follows:
4
Press the jog lever to enter the
selected surround mode.
Selecting the sound quality
(6-Band Equalizer)
1
During playback, press SOUND
repeatedly to select “SOUND”.
2
Press and hold SOUND for 2 seconds
or more.
3
Slide the jog lever repeatedly to select
the sound mode.
Each time you slide the jog lever, A
and B change as follows:
4
Press the jog lever to enter the
selected sound mode.
To cancel the procedure
Press and hold the DISPLAY button or x
button for 2 seconds or more.
To cancel the setting
Press SOUND repeatedly until the
indication disappears in B.
To modify and store the sound
You can customize the sound settings in
“CUSTOM1” and “CUSTOM2”.
1 Do steps 1 to 3 above, and then slide the jog
lever until “CUSTOM1” or “CUSTOM2”
appears.
2 Press the jog lever.
3 Slide the jog lever repeatedly to select the
frequency.
4 Press VOL+, – repeatedly to adjust the level.
5 Repeat step 3 and 4 to adjust the level for
each frequency.
6 Press the jog lever to enter the selection.
To cancel procedure
Press and hold the DISPLAY button or x
button for 2 seconds or more.
For the recorder operation, see
page 63.
A B
STUDIO V-SUR S
LIVE V-SUR L
CLUB V-SUR C
ARENA V-SUR A
A B
HEAVY SOUND H
POPS SOUND P
JAZZ SOUND J
UNIQUE SOUND U
CUSTOM1 SOUND 1
CUSTOM2 SOUND 2
B A
Frequency (100 Hz)
From the left, you can select 100 Hz,
250 Hz, 630 Hz, 1.6kHz, 4 kHz, or 10 kHz.
You can select from among seven levels.
–10 dB, –6 dB, –3 dB, 0 dB, +3 dB,
+6 dB, +10 dB
Level (+10 dB)