Sony MZ-NF810 - Manual (Page 18)

18
Getting started
Charge the rechargeable battery before using. Even if the rechargeable
battery is not charged, you can use the recorder as long as the AC
power adaptor is connected.
1
Insert the rechargeable battery
2
Charge the rechargeable battery.
1
Connect the AC power adaptor to the
battery charging stand and the AC
adaptor to a wall outlet.
2
Place the recorder on the battery
charging stand.
“Charging” flashes, e appears in the
display, and charging starts. When
charging is completed, the battery
indication disappears.
Full charging of a completely
discharged rechargeable battery takes
about 2.5 hours.
3
Remove the recorder from the battery
charging stand.
e
E
Insert the NH-10WM rechargeable
battery minus end first. Close the lid. Slide OPEN to open the
battery compartment lid.
AC power
adaptor
To DC IN 3V
To a wall outlet Battery charging stand
(at the bottom)
Attach the connector to the jack firmly.