Sony DCR-TRV900 - Manual (Page 107)

107
Memory card slot operations
Viewing a still picture – memory photo playback
Note
When displaying the index screen, the number appears above each image. This indicates the
recording order on the floppy disk or PC card. These numbers are different from the data file
names.
The image quality mode indicator
The indicator may show a different mode in which you recorded. This is not a malfunction.
The indicator shows the volume of the data file. For instance, if the volume of SFN image is
small enough, it may be displayed as FIN or STD.
Image data modified with personal computers or shot with other equipment
Those image data cannot be displayed on the index screen.
Viewing the recorded images using a personal computer
The image data recorded with this camcorder is compressed in the JPEG format. If your
personal computer has an application software that allows you to see JPEG images, you can
see images recorded on a floppy disk or PC card on a computer screen. For detailed
instructions on operation, refer to the operating instruction supplied with the application
software.
Example: Operation on a computer that has Windows 95 installed
(1) Start the Windows 95, and insert the floppy disk into the disk drive of your
computer.
(2) Open “My Computer,” and double-click on “3.5 inch FD.”
(3) Double-click on the file of the desired image.
Examples of recommended OS/application software
OS
• Windows 3.1
• Windows 95
• Windows NT3.51 or newer versions, etc.
Application
• Microsoft Internet Explorer, etc.
Notes
• For Macintosh, you can use the floppy disk recorded with this camcorder using the PC
Exchange with Mac OS system 7.5 or higher. A viewing application for Macintosh is also
necessary for viewing images.
• When you see images recorded with the camcorder on a personal computer, the display
may show lines on the edge of the screen, depending on the status of video input signals at
the moment. This is not a malfunction.