Sony DCR-TRV900 - Manual (Page 48)

48
Shooting with manual adjustment
Adjusting recording level
You can adjust the recording sound level. Use headphones to monitor the sound when you
adjust.
(1) Set the POWER switch to CAMERA.
(2) Press MENU to display the menu.
(3) Turn the control dial to select
, then press the dial.
(4) Turn the control dial to select MIC LEVEL, then press the dial.
(5) Turn the control dial to select MANUAL, then press the dial.
(6) Turn the control dial to select LEVEL SET, then press the dial.
(7) Turn the control dial to adjust the microphone level, so that the peak indicator in
the lower-right corner does not light up. It is recommended to use headphones (not
supplied) to monitor the sound when making the adjustment.
(8) Press MENU to erase the menu display.
To adjust the microphone level automatically
Select AUTO in step 5, then press the control dial.
Notes on the adjustment
•The sound level setting is retained as long as the power is on and for about five minutes
after removing the battery.
•Sound level indicator appears at the lower right on the LCD screen or in the viewfinder.
The sound input through the AUDIO/VIDEO jack
You cannot adjust the recording level of the sound.
1
2,8
POWER
OFF
CAMERA
MEMORY
VTR
MENU
5,6
7
3,4
T A P E S E T
R E C M O D E
A U I D O M O D E
M I C L E V E L
R E M A I N
[ M E N U ] : E N D
T A P E S E T
R E C M O D E
A U I D O M O D E
M I C L E V E L A U T O
R E M A I N
R E T U R N
[ M E N U ] : E N D
T A P E S E T
M I C L E V E L
L E V E L S E T
R E T U R N
[ M E N U ] : E N D
T A P E S E T
R E C M O D E
A U I D O M O D E
M I C L E V E L A U T O
R E M A I N M A N U A L
R E T U R N
[ M E N U ] : E N D
T A P E S E T
M I C L E V E L
L E V E L S E T
R E T U R N
[ M E N U ] : E N D