Searching for the end of the picture – Sony DCR-TRV900 User Manual
Page 24
24
Searching for the end of the picture
You can go to the end of the recorded portion after you record and play back the tape. The
tape starts rewinding or fast-forwarding and the last about 5 seconds of the recorded portion
plays back. Then the tape stops at the end of the recorded picture (End Search).
Open the LCD panel and press END SEARCH during recording standby.
This function works when the POWER switch is set to CAMERA or VTR.
Notes on End Search
•When you use a tape without cassette memory, the End Search function does not work
once you eject the cassette after recording.
•When you use a tape with cassette memory, the End Search function works once you eject
the cassette. When you play back a tape which has a blank portion in the beginning or
between the recorded portions, the End Search function will not work correctly.
END SEARCH