Sony DCR-TRV900 - Manual (Page 31)

31
Advanced operations
Changing the mode settings
TV INPUT <VIDEO1/VIDEO2/VIDEO3/OFF>
Select 1, 2 or 3 of the video input on the TV which the AV cordless IR receiver (not supplied)
is connected to when using the LASER LINK function.
LTR SIZE <NORMAL/2X>
• Normally select NORMAL.
• Select 2X to display the selected menu item by twice size of the normal.
DEMO MODE <ON/OFF>
• Select ON to glance over the function of camcorder.
• Select OFF not to display demonstration.
Notes on DEMO MODE
• DEMO MODE is set to STBY (Standby) at the factory. The demonstration starts about 10
minutes after you set the POWER switch to CAMERA without inserting a cassette.
You can cancel the demonstration by inserting a cassette, setting the POWER switch to a
position other than CAMERA, or select OFF in the menu system. To select STBY again, set
the POWER switch to OFF when DEMO MODE is set to ON, and set the POWER switch
back to CAMERA.
• You cannot select DEMO MODE when a cassette is inserted in the camcorder.
• If you insert a cassette during the demonstration, the demonstration stops. You can start
recording as usual. DEMO MODE automatically returns to STBY.
• To look at the demonstration at once, eject the cassette, if inserted. Then select ON of
DEMO MODE and erase the menu display. The demonstration will begin.
Items for the OTHERS menu
WORLD TIME
Select this item to set the clock by a time difference. See page 119 for details.
BEEP <MELODY/NORMAL/OFF>
• Normally select MELODY so that a melody sounds when you start/stop recording, etc.
• Select NORMAL so that beeps sound when you start/stop recording, etc.
• Select OFF when you do not want to hear the beep sound.
COMMANDER* <ON/OFF>
• Select ON when using the supplied Remote Commander for the camcorder.
• Select OFF when not using the Remote Commander.
DISPLAY <LCD or V-OUT/LCD >
• Normally select LCD.
• Select V-OUT/LCD to display indicators both on the LCD screen and TV screen.
REC LAMP <ON/OFF>
• Normally select ON.
• Select OFF when you do not want the camera recording lamp on the front of the unit to
light up.
COLOR BAR <OFF/ON>
• Normally select OFF not to display the color bar.
• Select ON to display the color bar.
DV EDITING
Select this item when editing a tape on another equipment connected with the i.LINK cable
(DV connecting cable). See page 84 for details.