Maintenance information and precautions – Sony DCR-TRV900 User Manual

Page 123

Advertising
background image

123

Additional information

Moisture condensation

If the camcorder is brought directly from a cold place to a warm place, moisture may
condense inside the camcorder, on the surface of the tape, on the lens, on the head, or on the
floppy disk. In this condition, the tape may stick to the head drum and be damaged or the
camcorder may not operate correctly. To prevent possible damage under these
circumstances, the camcorder is furnished with moisture sensors. Take the following
precautions.

Inside the camcorder

If there is moisture inside the camcorder, the beep sounds and the { indicator flashes. Eject
the cassette or the floppy disk immediately. If this happens, none of the function except
cassette ejection will work. Open the cassette compartment, turn off the camcorder, and
leave it about 1 hour. When 6 indicator flashes at the same time, the cassette is inserted in
the camcorder. Eject the cassette, turn off the camcorder, and leave also the cassette about 1
hour.

On the lens

If moisture condenses on the lens, no indicator appears, but the picture becomes dim. Turn
off the power and do not use the camcorder for about 1 hour.

How to prevent moisture condensation

When bringing the camcorder from a cold place to a warm place, put the camcorder in a
plastic bag and allow it to adapt to room conditions over a period of time.
(1) Be sure to tightly seal the plastic bag containing the camcorder.
(2) Remove the bag when the air temperature inside it has reached the temperature

surrounding it (after about 1 hour).

Video head cleaning

To ensure normal recording and clear pictures, clean the video heads.
The video heads may be dirty when:
• mosaic-pattern noise appears on the playback picture
• playback pictures do not move
• playback pictures are hardly visible
• playback pictures do not appear
• the v indicator and “ Ò CLEANING CASSETTE” message appear one after another or

the v indicator flashes on the LCD screen or in the viewfinder.

If [a] or [b] happens, clean the video heads with the Sony DVM12CL cleaning cassette (not
supplied). Check the picture and if the above problem persists, repeat the cleaning. (Do not
repeat cleaning more than 5 times in one session.)

[a]

[b]

Maintenance information and precautions

or

Advertising