Usb devices, Playing back a usb device – Sony CDX-GT56UIW User Manual

Page 10

Advertising
background image

10

USB devices

• MSC (Mass Storage Class)-type USB

devices compliant with the USB standard
can be used.

• Corresponding codec is MP3 (.mp3),

WMA (.wma), AAC (.m4a) and AAC
(.mp4).

• Backup of data in a USB device is

recommended.

For details on the compatibility of your USB
device, visit the support site on the back
cover.

Note

Connect the USB device after starting the engine.
Depending on the USB device, malfunction or
damage may occur if it is connected before
starting the engine.

Playing back a USB device

1

Connect the USB device to the USB
connector with its USB cable.

Playback starts.

If a USB device is already connected, to start
playback, press

 repeatedly

until “USB” appears.

To stop playback, press and hold

 for 1 second.

To remove the USB device, stop the USB
playback, then remove the USB device.

Notes

• Do not use USB devices so large or heavy that

they may fall down due to vibration, or cause a
loose connection.

• Do not detach the front panel during playback

of the USB device, otherwise USB data may be
damaged.

Changing display items
Displayed items may differ depending on
the USB device, recording format and
settings.
Press

.

Notes

• The maximum number of displayable data is as

follows.
– folders (albums): 128
– files (tracks) per folder: 500

• It may take time for playback to begin,

depending on the amount of recorded data.

• DRM (Digital Rights Management) files may

not be played.

• During playback or fast-forward/reverse of a

VBR (Variable Bit Rate) MP3/WMA/AAC file,
elapsed playing time may not display
accurately.

• Playback of the following MP3/WMA/AAC

files is not supported.
– lossless compression
– copyright-protected

Advertising