Error displays/messages – Sony CDX-GT56UIW User Manual

Page 25

Advertising
background image

25

Error displays/Messages

CHECKING
 The unit is confirming the connection of a

USB device.
– Wait until confirming the connection is

finished.

ERROR
 The disc is dirty or inserted upside down.

– Clean or insert the disc correctly.

 A blank disc has been inserted.
 The disc cannot play due to a problem.

– Insert another disc.

 USB device was not automatically recognized.

– Reconnect it again.

 Press  to remove the disc.

FAILURE
 The connection of speakers/amplifiers is

incorrect.
– See the installation/connections manual of

this model to check the connection.

HUB NO SUPRT

(Hubs Not Supported)

 USB hub is not supported on this unit.

NO DEV

(No Device)

 USB is selected as source without a USB device

connected. A USB device or a USB cable has
been disconnected during playback.
– Be sure to connect a USB device and USB

cable.

NO MUSIC
 The disc or USB device does not contain a

music file.
– Insert a music CD in this unit.
– Connect a USB device with a music file in it.

NO NAME
 A disc/album/artist/track name is not written

in the track.

NOT FOUND
 There is no item beginning with the selected

letter in Alphabet search.

OFFSET
 There may be an internal malfunction.

– Check the connection. If the error indication

remains on in the display, consult your
nearest Sony dealer.

OVERLOAD
 USB device is overloaded.

– Disconnect the USB device, then change the

source by pressing

.

– Indicates that the USB device is out of order,

or an unsupported device is connected.

READ
 The unit is reading all track and album

information on the disc.
– Wait until reading is complete and playback

starts automatically. Depending on the disc
structure, it may take more than a minute.

USB NO SUPRT

(USB Not Supported)

 The connected USB device is not supported.

– For details on the compatibility of your USB

device, visit the support site.

” or “

 During reverse or fast-forward, you have

reached the beginning or the end of the disc
and you cannot go any further.

 The character cannot be displayed with the

unit.

If these solutions do not help improve the
situation, consult your nearest Sony dealer.
If you take the unit to be repaired because of
CD playback trouble, bring the disc that was
used at the time the problem began.

Advertising