Sony ICD-PX720 - Manual (Page 21)

ICD-PX720 4-113-173-11(1)
1
GB
Re
co
rd
in
g
To Do this
pause
recording*
Press  REC/PAUSE.
During recording pause, the
operation indicator flashes
in red and “PAUSE“ flashes in
the display window.
release pause
and resume
recording
Press  REC/PAUSE again.
Recording resumes
from that point. (To stop
recording after pausing
recording, press  (stop).)
review the
current
recording
instantly
Press  PLAY/STOP•ENTER.
Recording stops and
playback starts from the
beginning of the message
just recorded.
review during
recording
Press and hold
–  during recording or
recording pause. Recording
stops and you can search
backwards while listening
to fast playback sound.
After you release –  ,
playback starts from that
point.
* One hour after you pause recording,
recording pause is automatically released
and the IC recorder enters the stop mode.
Monitoring the recording
Connect commercially available
headphones to the  (headphone)
jack and monitor the recording. You
can adjust the monitoring volume by
pressing VOL + or –, but the recording
level is fixed.
Remaining memory indication
During recording, the remaining memory
indicator decreases one by one.
The memory is
nearly full.
Flashing
When the remaining time of recording
reaches 10 minutes, the last one of the
indication flashes.
If the remaining recording time display
mode is selected, the remaining
recording time display will also flash
when the remaining time reaches 1
minute. The display will be changed
automatically to the remaining time
display.
When the memory is full, recording
automatically stops and and “FULL”
will flash in the display window three
times. To continue recording, first erase
some of the messages.