Sony ICD-PX720 - Manual (Page 48)

ICD-PX720 4-113-173-11(1)

GB
Notes
When the clock has not been set or no
messages are recorded, you cannot set the
alarm.
The alarm sounds even if you set “BEEP” to
“OFF” in the menu (page 64).
If you try to set the alarm to play back a
message at a previously set time on another
message, “PRE SET” will be displayed,
preventing new settings.
If the alarm time comes while another
message is being played back with an alarm,
the playback stops and the new message
will be played back.
If the alarm time comes during recording,
alarm will sound for 10 seconds after the
recording is finished and playback begins.
“  ” will flash when the alarm time comes.
If more than one alarm time comes during
recording, only the first message will be
played back.
If you delete a message on which you
have set an alarm, that alarm will be also
cancelled.
If the alarm time comes during erasing
operation, alarm will sound for 10 seconds
after the erasing is finished and playback
begins.
If the alarm time comes while you are
updating the data, the alarm setting will be
cancelled automatically.









