Agilent Technologies B2201A - Manual (Page 114)

4-16 Agilent B2200 User’s Guide, Edition 2
Programming
Programming Examples
Saving Input/Output Labels
You can define labels to use for the input/output ports when you control the switch
in the GPIB local mode. The labels are cleared by *RST. So it is recommended to
save the labels into the internal memory and define a comment for the memory data.
You can see the comment when you load/save the memory data in the GPIB local
mode.
Setup: • Channel configuration mode: Auto
• Label for input 1: SMU1
• Label for input 2: SMU2
• Label for input 3: SMU3
• Label for input 4: UNUSED
• Label for input 5: SMU4-F
• Label for input 6: SMU4-S
• Label for input 7: SMU5-F
• Label for input 8: SMU5-S
• Label for input 9: OPEN
• Label for input 10: BIAS
• Label for input 11: OPEN
• Label for input 12: GROUND
• Label for input 13: CMU-H
• Label for input 14: CMU-L
• Label for output 1: BULK
• Label for output 2: SOURCE
• Label for output 3: GATE
• Label for output 4: DRAIN
• Label for output 5: GROUND
• Comment for memory 1: Port label info