Sony KLV-23M1 - Manual (Page 23)

23
Installing the TV
Bundling Cords and Cables
You can organize the cables in the back of the TV.
1
Bundle the cables into the opening of the cable
cover, and attach the cover.
2
Put the cables from both sides together and
secure them with the clip at the bottom.
Notes
• It may not be possible to fasten with clips if the cables are
too thick.
• If all the cables cannot be secured with the clip, you may
leave some of them hanging down on either side of the
TV.
Clip
Adjusting the Viewing Angle of the
TV
You can adjust the angle to avoid the reflection of
light and get a better view of the TV.
Note
• When adjusting the angle, steady the base of the stand with
your hand. Be careful not to get your fingers caught between
the TV and the stand.
• When you adjust the angle, make sure that the cables are not
caught between the TV and the stand. If some of the cables get
caught, divide them into two groups at the clip and pull them
away from each other to free them up.
Carrying the TV
When carrying the TV, hold it as illustrated below.