Sony KLV-23M1 - Manual (Page 29)

29
Connecting and Setting the TV
A
UDIO
R
L
A
UDIO
R
L
3
HD/D
VD IN
A
UDIO OUT
(V
AR/FIX
)
P
B
Y
P R 1080i / 720p / 480p / 480i()
When using your audio system speakers
You can control the volume output from your audio system using the TV’s
remote control (see “Programming the Remote Control” on page 16), by
setting “Audio Out” in the
(Audio) menu to “Variable.”
If you want to adjust the volume through your audio system, set “Audio Out”
to “Fixed.”
Notes
• The video signal is not output through the AUDIO OUT jacks.
• When “Audio Out” in the
(Audio) menu is set to “Variable,” “Speaker” is to “Off,”
check if the speaker volume is moderate before switching “Speaker” from “Off” to “On.”
Otherwise, the speaker volume may be too loud.
Connecting an AV Receiver
Disconnect all power sources before making any connections.
Using an AUDIO cable, connect the TV’s AUDIO OUT jacks to the AV
receiver’s AUDIO IN jacks.
AUDIO cable
(not supplied)
Rear of TV
Audio
input
AV Receiver
(Compact AV system, etc.)
AUDIO-R (red)
AUDIO-L (white)