Sony KLV-23M1 - Manual (Page 30)

30
Connecting a DVD Player with Component Video
Connectors
Use this hookup if:
• Your DVD player has component (Y, P
B
, P
R
) jacks.
Tips
• The Y, P
B
and P
R
jacks on your DVD player are sometimes labeled as Y, C
B
and C
R
, or Y,
B-Y and R-Y. If so, connect the cables to the matching colors.
• To take advantage of the Wide Screen Modes, set the aspect ratio of the output signal to
16:9 on your DVD player. For details, refer to the operating instructions supplied with your
DVD player.
Disconnect all power sources before making any connections.
1
Using a component video cable, connect the DVD player’s Y, P
B
and P
R
jacks to the Y, P
B
and P
R
jacks on the TV.
Use the HD/DVD 3 IN connections.
2
Using an AUDIO cable, connect the DVD player’s AUDIO OUT jacks to
the TV’s AUDIO IN jacks.
Note
The Y, P
B
and P
R
jacks do not provide audio, so audio cables must be connected to
provide sound.
Tip
Use VIDEO 3 on the remote control to select HD/DVD 3 IN to watch the DVD player input.
A
UDIO
R
L
A
UDIO
R
L
3
HD/D
VD IN
A
UDIO OUT
(V
AR/FIX
)
P
B
Y
P
R 1080i / 720p / 480p / 480i()
Rear of TV
P
R
P
B
Y
AUDIO cable (not supplied)
Component video cable (not supplied)
DVD Player
AUDIO-L (white)
AUDIO-R (red)