Sony KLV-23M1 - Manual (Page 50)

50
Setting the Video Inputs
You can enjoy images (and sound) from optional
video equipment connected to this unit by selecting
the appropriate input. For details on connection, see
pages 24 through 35(Continued).
1
0-9 and ENT
(enter) buttons
CH +/–
1
For video input 1 and 2
Press VIDEO 1/2 repeatedly until the desired
video input appears.
Each time you press VIDEO 1/2, the input
changes as follows.
Select
• VIDEO 1 IN
• VIDEO 2 IN
For video input 3 (HD/DVD 3 IN)
Press VIDEO 3.
“Video 3”* indication appears.
For video input 4 (HDMI 4 IN)
Press VIDEO 4.
“Video 4”* indication appears.
* The type of picture signal (480i, 480p, 720p, or 1080i)
appears under “Video 3” and “Video 4.”
Tips
• When “Skip” is selected as a label using “Video Label” in
the (Setup) menu, the selected input will be skipped
in the cycle (see page 51).
• You can also select the inputs by using the TV/VIDEO
button on the TV.
TV t VIDEO 1 IN t VIDEO 2 IN
R
HDMI 4 IN T HD/DVD 3 IN T
• When you have preset a label for each video input using
“Video Label” in the (Setup) menu, the label will be
displayed (see page 51).
2
Operate the selected optional equipment.
For details, see “Using your Remote Controls
with Other Equipment” on page 18, or refer to
the instructions supplied with each equipment.
To return to watching the TV
Press TV, any of 0 - 9 and ENT (enter) or CH +/–.
Display indication
Video 1
R r
Video 2
or or
TV
MUTING
PICTURE WIDE
FAVORITES
TV VIDEO 1/2 VIDEO 3 VIDEO 4
F1
F2
MENU
SLEEP DISPLAY
MODE
SAT/
CABLE
POWER
RESET MTS/SAP
GUIDE TV/SAT
DVD/
VCR
TOP MENU
FREEZE