Sony DSC-H1 - Manual (Page 74)

74
To disconnect the USB cable/ remove
the “Memory Stick”/turn off the
camera
Drag and drop the drive icon or the icon of
the “Memory Stick” to the “Trash” icon,
then remove the USB cable, remove the
“Memory Stick”, or turn off the camera.
• If you are using Mac OS X v10.0, perform the
procedure above after you have turned your
computer off.
• You can create an image file that is compatible
with the video CD creation function. To save the
data in the video CD format on a CD-R, you
need Toast (not supplied) by Roxio.
To install “ImageMixer VCD2”
• Shut down all other application software before
you install “ImageMixer VCD2.”
• The display settings should be 1024 × 768 dots
or higher and 32,000 colors or higher.
1 Turn on your Macintosh computer, and
insert the CD-ROM (supplied) into the
CD-ROM drive.
2 Double-click the CD-ROM icon.
3 Copy the [IMXINST.SIT] file in the
[MAC] folder to the hard disk icon.
4 Double-click the [IMXINST.SIT] file in
the copy-to folder.
5 Double-click the extracted [ImageMixer
VCD2_Install] file.
6 After the user information screen appears,
enter the desired name and password.
The installation of the software starts.
To start up “ImageMixer VCD2”
Open [Image Mixer] in [Application], then
double-click [ImageMixer VCD2].
For information on the use of the
software
Click [?] at the upper-right corner of each
screen to show the on-line help.
Creating a video CD using
“ImageMixer VCD2”
Technical support for “ImageMixer
VCD2” is provided by the Pixela User
Support Center. For more
information, refer to the information
included on the CD-ROM.