Sony KDL-32XBR950 - Manual (Page 27)

25
Setup
Storing the AC
power cord and the
display interface
cable inside the
stand
(KDL32XBR950
only) You can store the AC power cord and the display interface cable into the
stand by removing the cable cover on the display stand.
1
Press down at the tab on the top of the cable cover, then pull out.
2
Remove the cable cover by lifting it up.
3
Store the excess AC power cord and the display interface cable inside the stand
and draw out through the center hole.
Insert the cable cover into the holes on the bass of the stand, then attach the
cable cover by pressing the cable cover into place.
Rear of the display unit
Cable cover
Rear of the display unit
Rear of the display unit
Holes on the base of
the stand