Sony KDL-32XBR950 - Manual (Page 5)

3
Cleaning
Clean the AC power plug regularly.
If the plug is covered with dust and it picks up
moisture, its insulation may deteriorate and result in
fire. Unplug the AC power plug and clean it
regularly.
For the set with a three-wire grounding type AC
plug
This plug will only fit into a grounding-type power
outlet. This is a safety feature. If you are unable to
insert the plug into the outlet, contact your electrician
to have a suitable outlet installed. Do not defeat the
safety purpose of the grounding plug.
Overloading
Do not overload wall outlets, extension cords or
convenience receptacles beyond their capacity, since
this can result in fire or electric shock.
Always turn the set off when it is not being used.
When the set is left unattended and unused for long
periods of time, unplug it from the wall outlet as a
precaution against the possibility of an internal
malfunction that could create a fire hazard.
If a snapping or popping sound from a TV set is
continuous or frequent while the TV is operating,
unplug the TV and consult your dealer or service
technician. It is normal for some TV sets to make
occasional snapping or popping sounds, particularly
when being turned on or off.
AC power cord and display interface cable
If you damage the AC power cord or display interface cable, it may result
in fire or electric shock.
s Do not pinch, bend, or twist the cable excessively. The core lines
may be bared and cut, and cause short-circuit, resulting in fire or
electric shock.
s Do not convert or damage the AC power cord or display interface
cable.
s Do not put anything heavy on the AC power cord or display interface
cable. Do not pull the AC power cord or display cable.
s Keep the AC power cord or display interface cable away from heat
sources.
s Be sure to grasp the plug when disconnecting the AC power cord.
s Refer to the operating instructions when disconnecting the display
interface cable.
If the AC power cord or display interface cable is damaged, stop using it
and ask your dealer or Sony service center to exchange it.
Cleaning
Unplug the AC power cord when cleaning this unit. If not, it may result in
electric shock.
Object and Liquid Entry
Never push objects of any kind into the set through the
cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or
electric shock. Never spill liquid of any kind on the
set.
Ventilation holes
Do not insert anything in the ventilation holes. If
metal or something flammable enters, it may result in
fire or electric shock.
Notes on cleaning of the display
s Be sure to unplug the TV unit before cleaning.
s Minimize contact with the LCD screen surface
since the special coating applied may be
affected. Use a dry soft cloth when removing
dust from the screen.
s Do not use alcohol, benzine, thinner, etc., as it may damage the
coating or cause LCD screen deterioration.
s Always use commercially available chemical fibre cleaning cloths
in accordance with their supplied instructions.
s Do not allow the LCD screen to come in contact with volatile
compounds, such as insecticide. Also, never let the LCD screen
come in contact with rubber or plastic products for an extended
period of time. This type of contact may damage the coating, or
cause the LCD screen to deteriorate.
Notes on cleaning of the chassis
s Wipe the chassis gently with a dry soft cloth. Stubborn stains may be
removed with a cloth slightly dampened with a solution of mild
soap, and then wiped dry.
s Never subject the chassis to volatile compounds such as alcohol,
benzine, thinner or insecticide. Also, never let the chassis come in
contact with rubber or plastic products for an extended period of
time. This type of contact may damage the coating, and cause the
chassis to deteriorate, or efface the printing on the chassis.
Attachments
Do not use attachments not recommended by the
manufacturer, as they may cause hazards.
Installation
When installing the display unit on the wall, be sure to
have assemblers install and keep away from the unit.
If a person other than the assemblers install the display
unit on the wall using a wall mount unit, the unit may
fall and cause serious injury when an earthquake
occurs or when the unit is not installed securely.
Carrying
Carrying the set requires two or more people.
If you carry the set in a manner other than that
specified, it may drop and a serious injury may be
caused. Be sure two or more people carry the set.
When transporting, do not subject the set to shocks or
vibration excessive force. The set may fall and damage the set, causing
serious injury.
AC power cord
Unplug the AC power cord when moving the set.
Do not move the set with the AC power cord plugged in. It may damage
the AC power cord and result in fire or electric shock.
(Continued)