Sony KDL-32XBR950 - Manual (Page 45)

43
Setup
Notes on Using This Connection
To Do This ... Do This ...
Watch the satellite receiver Press TV/VIDEO repeatedly to select the VCR input (VIDEO 1 in the illustration).
The VCR may need to be turned on and set to the satellite receiver input.
Watch the VCR Press TV/VIDEO repeatedly to select the input to which the VCR is connected
(VIDEO 1 in the illustration).
Set up the remote control to
operate the satellite receiver or
VCR If you have a non-Sony VCR or satellite receiver, you must program the remote
control. See “Programming the Remote Control” on page 60.
Activate the remote control to
operate the satellite receiver or
VCR For the satellite receiver, press FUNCTION repeatedly until the SAT/CABLE
indicator lights up. For the VCR, press FUNCTION repeatedly until the DVD/VCR
indicator lights up.
Control satellite receiver and
VCR functions with the remote
control See “Operating a Satellite Receiver” on page 63 and “Operating a VCR or D-VHS”
on page 63.
Label video inputs to easily
identify equipment connected to
the TV See the instructions for setting up Video Labels on page 116.