Sony KDL-32XBR950 - Manual (Page 30)

28
Setup
To reattach the detached speakers to the display unit
1
Remove the speaker jack covers.
When attaching the speakers, spread padding or the
packaging material on the floor to prevent damage to the
speaker housing or terminals. Be careful not to place too much
pressure or use excessive force when detaching the speakers.
Be sure the display unit is stable on the floor.
To prevent the surface of the display unit from scratches and
soils while attaching the speakers, protect it with a soft cloth or
a blanket.
Speaker
(left)
Speaker
(right)
Rear side
of the
display unit
Packing
material,
etc.
Padding,
etc.
Rear of the display unit
Speaker jack cover
Grasp the
center part
of the
speaker
jack cover
and pull it
out.