Sony STR-DE685 - Manual (Page 14)

14
GB
AUX AUDIO In hookup
If you have an individual audio component
(except PHONO)
Use the audio cords to connect the LINE OUT
jacks on the CD player, tape deck or MD deck
to the AUX IN jacks on the receiver so that you
can listen to stereo sources in surround sound.
Setting the voltage selector
If your receiver has a voltage selector on the
rear panel, check that the voltage selector is set
to the local power supply voltage. If not, use a
screwdriver to set the selector to the correct
position before connecting the AC power cord
to a wall outlet.
AC power cord
To a wall outlet
Connecting the AC power
cord
* Except for models of area code AR
The configuration, shape, and number of AC outlets
vary according to the model and country to which
the receiver is shipped.
Before connecting the AC power cord of this
receiver to a wall outlet, connect the speaker
system to the receiver (page 15).
Connect the AC power cord(s) of your audio/
video components to a wall outlet.
If you connect other audio/video components to
the AC OUTLET(s) on the receiver, the
receiver will supply power to the connected
component(s), allowing you to turn the whole
system on or off when you turn the receiver on
or off.
Caution
Make sure that the total power consumption of the
component(s) connected to the receiver’s AC
OUTLET(s) does not exceed the wattage stated on the
rear panel. Do not connect high-wattage electrical
home appliances such as electric irons, fans, or TVs
to this outlet.
120V 240V 220V
VOLTAGE SELECTOR VOLTAGE SELECTOR
SPEAKERS IMPEDANCE USE 8 – 16 Ω
R L
MPEDANCE USE 8 – 16 Ω
FRONT A R
AC OUTLET
b
FRONT B
R L
R L
b
AC OUTLET*
Other hookups (continued)