Sony STR-DE685 - Manual (Page 56)

56
GB
Area code Power requirements
E2/E3, AU 240 V AC, 50 Hz
SP, CEL, CEK, AR 230 V AC, 50 Hz
TW 110 V AC, 60 Hz
MX 120 V AC, 60 Hz
Frequency response
MULTI CH IN,
CD/SACD, AUX,
MD/TAPE, DVD/LD,
VIDEO 1, 2, 3
Inputs (Analog)
MULTI CH IN,
CD/SACD, AUX,
MD/TAPE, DVD/LD,
VIDEO 1, 2, 3
3) INPUT SHORT (with sound field, equalizer and
bass boost bypassed).
4) Weighted network, input level.
Inputs (Digital)
DVD/LD (Coaxial) Sensitivity: –
Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
VIDEO 2, CD/SACD, Sensitivity: –
MD/TAPE (Optical) Impedance: –
S/N: 100 dB
(A, 20 kHz LPF)
Outputs (Analog)
MD/TAPE (OUT), Voltage: 250 mV
VIDEO 1 (AUDIO OUT) Impedance: 10 kilohms
SUB WOOFER Voltage: 2 V
Impedance: 1 kilohms
Outputs (Digital)
MD/TAPE (Optical) Sensitivity: –
EQ
Gain levels:
±6 dB, 1 dB step
10 Hz – 70 kHz
+0.5/–2 dB (with sound
field, equalizer, and bass
boost bypassed)
Sensitivity: 250 mV
Impedance: 50 kilohms
S/N
3) : 96 dB
(A, 250 mV 4) )
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
With 8 ohm loads, both channels driven, from
20 – 20,000 Hz; rated 100 watts per channel
minimum RMS power, with no more than
0.09 % total harmonic distortion from 250
milliwatts to rated output (Models of area code
U only).
Amplifier section
POWER OUTPUT
Models of area code U, CA
Rated Power Output at Stereo Mode
(8 ohms 20 Hz – 20 kHz, THD 0.09 %)
100 W + 100 W
Reference Power Output
(8 ohms 1 kHz, THD 0.7 %)
FRONT
1) : 100 W/ch
CENTER 1) : 100 W
SURR 1) : 100 W/ch
Models of area code CEL, CEK
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W 2)
Reference Power Output 2)
(8 ohms 1 kHz, THD 0.7 %)
FRONT
1) : 100 W/ch
CENTER 1) : 100 W
SURR 1) : 100 W/ch
Models of other area code
Rated Power Output at Stereo Mode
(8 ohms 1 kHz, THD 0.7 %)
100 W + 100 W 2)
Reference Power Output 2)
(8 ohms 1 kHz, THD 10 %)
FRONT
1) : 120 W/ch
CENTER 1) : 120 W
SURR 1) : 120 W/ch
1) Depending on the sound field settings and the
source, there may be no sound output.
2) Measured under the following conditions: