Sony PCGA-DDRW1 User Manual
Page 23
23
GB
Continued on next page
1
Turn the Digital Video Camera Recorder’s power on, and set
it to video playback mode.
For details of Digital Video Camera Recorder operations, refer to your
Digital Video Camera Recorder manual.
2
Connect the supplied i.LINK cable to the DV input/output
terminal on the Digital Video Camera Recorder.
3
Connect the other end of the i.LINK cable to the i.LINK
connector on the back of the drive.
Note
Do not connect any i.LINK equipment other than a Digital Video Camera Recorder
to the i.LINK connector on the drive.
4
Click the [Start] button, and then click [My Computer] to
verify that
(Sony DV camcorder or other equipment) has
been added in the “My Computer” window.
i.LINK cable
DV input/output terminal
i.LINK connector
i.LINK cable
VAIO notebook peripheral
cable (80 cm)
Notebook
Digital Video
Camera Recorder