Sony PCGA-DDRW1 - Manual (Page 34)

34 GB
5
On the [Start] menu, click [My Computer], double-click
[Drive E*], open “Drag’n Drop CD+DVD”, and then double-
click “Setup.exe”.
* Drive E may have a different name depending on the notebook you are using.
6
Follow the on-screen instructions.
7
Restart your notebook after installing “Click to DVD” and
“Drag’n Drop CD+DVD” software.
8
On the [Start] menu, click [My Computer], double-click [Drive
E*], open “SonicStage Update Program”, and then double-
click “Setup.exe”.
* Drive E may have a different name depending on the notebook you are using.
9
Click the [Start] button, point to [All Programs] and check
that “Click to DVD” and “Drag’n Drop CD+DVD” are
displayed.
For Customers in Europe
1
Turn on your notebook and prepare the drive for installation
as necessary.
To install the drive, see “Connecting the Drive” (page 15).
2
Insert the supplied software CD-ROM into the drive that you
prepared in step 1.
The installer starts.
Note
If the installer does not start automatically, on [Start] menu, click [My Computer],
and then double-click the drive labeled [PCGA-DDRW1].
3
Click [English].
4
Click [Install Drag’n Drop CD+DVD].
The Drag’n Drop CD+DVD setup starts.