Sony PCV-E204 - Manual (Page 45)

Removing, Installing, and Replacing Components 37
Removing a Memory Module
You may need to remove a memory module if you change the memory
configuration or replace a bad module.
1 Remove the left side panel (see “Removing the Left Side Panel” on
page 22 ).
2
Remove the bottom panel (see “Removing the Bottom Panel” on
page 23).
3
Remove the front panel (see “Removing the Front Panel” on page 24).
4
Slide the diskette drive out approximately two inches (see
“Detaching the Diskette Drive” on page 39).
5
Remove any add-in cards (see “Removing an Add-in Card” on
page 29) and other components as needed to access the memory
modules.
6 Locate the memory module you wish to remove.
!
Before opening the system unit, save any open files, exit Windows, turn off
the power of the computer and all attached peripherals, and then unplug the
power cord.
KY0073.VSD