Sony PCV-E204 - Manual (Page 89)

BIOS Setup Options 81
I/O Device Configuration
Serial port A: [Auto]
Disabled
Enabled
Base I/O address * : [3F8]
2F8
3E8
2E8
Interrupt*: [IRQ 4]
IRQ 3
Parallel port: [Enabled]
Disabled
Auto
Mode † : [ECP]
Output only
Bi-directional
EPP
Base I/O address
‡
: [378]
278
3BC
Interrupt‡: [IRQ 7]
IRQ 5
DMA channel ** : [DMA 1]
DMA 3
Floppy disk controller: [Enabled]
Auto
Disabled
Base I/O address: [Primary]
Secondary
Large Disk Access Mode: [DOS]
Other
Local Bus IDE adapter: [Both]
Disabled
Primary
Secondary
Sound: [Enabled]
Disabled
* This option appears only if the port is set to Enabled.
† This option appears only if the port is set to Auto or Enabled.
‡ This option appears only if the port is set to Enabled and Mode is not set to EPP.
** This option appears only if the port is set to Enabled and Mode is set to ECP.