Remote control, Button description – Sony FWD-S42E1 User Manual

Page 53

Advertising
background image

13

GB

GB

Remote Control

Button Description

• The 5 button and

+/- button have a tactile dot. Use the tactile dot as a reference when operating the display.

• Insert two size AA (R6) manganese batteries (supplied) by matching the 3 and # on the batteries to the diagram inside the

remote control’s battery compartment.

Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type recommended by the
manufacturer. When you dispose of the battery, you must obey the law in the relative area or country.

1

ON (power on) button

Press to turn the display on.
Operate when the main power switch on the backside of the display
is “ON.”

2

DVI button

Press to select the signal input to the DVI connector.

3

PICTURE button

Selects “Picture Mode”. Each press toggles between “Vivid”,
“Standard”, “Custom”, and “Conference”.

4

F/f/G/g/

(arrow/enter) buttons

The

F/f/G/g

buttons move the menu cursor and set values, etc.

Pressing

button sets the selected menu or setting items.

5

(wide mode) button

Press to change the aspect ratio. See page 15.

6

MENU button

Press to show menus. Press again to hide them. See page 21.

Notes

Caution

,

Push and slide to open

Advertising