Sony VGN-A140P - Manual (Page 164)

To set up TV connections
The best method of connecting your computer system, TV monitor or display, and cable service access, depends on the type
of cable connection available in your home.
TV signal reception strength will vary widely depending on service availability in your area as well as the type of connection
available.
The A/V port replicator is supplied with certain audio and video cables. Depending on your in-home cable access, you
may require extra cables, adapters or connection equipment not supplied with your computer.
The TV coaxial converter cable
One primary cable to connect your computer to a TV cable or antenna is the TV coaxial converter cable (supplied with the
A/V port replicator). The mini-jack end connects to the computer's VHF/UHF port, and the coaxial end connects to the cable
service access or antenna
TV coaxial conv erter cable
Connecting to standard cable access (CATV)
Option 1
1. Connect one end of the coaxial converter cable (supplied) to your cable service access.
2. Connect the other end of the coaxial converter cable to the VHF/UHF port on the A/V port replicator.
To connect in CATV m ode (Option 1)
Option 2
1. Connect the two metal hooks on the RCA transformer cable (optional) to your cable service access.
2. Connect the TV coaxial converter cable (supplied) from the transformer end of the RCA transformer cable to the
VHF/UHF port on the port replicator.
To connect in CATV m ode (Option 2)
Page 164