Sony VGN-A140P - Manual (Page 165)

Connecting to a standard antenna
You can connect your Giga Pocket system to an indoor/outdoor antenna system, using Option 1 or Option 2 from the
previous section,
Connecting to standard cable access (CATV) . Depending on the type of antenna system in your home,
your connection may require a VHF/UHF RF combiner/transformer (optional) to connect your computer and the
indoor/outdoor antenna system.
If you are connecting to an indoor/outdoor antenna, you may need to reorient the antenna for best reception. Move
the antenna cable away from other power sources or connectors to reduce reception interference.
Option 1
1. Connect one end of a TV coaxial cable (optional) to your antenna outlet. Connect the other end to a VHF/UHF RF
combiner/transformer (optional).
2. Connect the coaxial cable feed connector (optional) to the VHF/UHF combiner/transformer.
3. Connect the TV coaxial converter cable (supplied) from the feed connector to the VHF/UHF port on the port
replicator.
Option 2
1. Connect both ends of the antenna's twin lead cable to the screw-type grips on the combiner/transformer.
2. Connect the coaxial cable feed connector (optional) to the VHF/UHF combiner/transformer.
3. Connect the TV coaxial converter cable (supplied) from the feed connector to the VHF/UHF port on the port
replicator.
To connect in standard antenna m ode (air)
Your VAIO ® computer is supplied with certain audio and video cables. Depending on your in-home cable access, you
may require extra cables, adapters or connection equipment not supplied with your computer.
Page 165