Inserting and ejecting cds or dvds, Cds and dvds – Sony VGN-A140P User Manual

Page 90

Advertising
background image

CDs and DVDs

Inserting and Ejecting CDs or DVDs

Avoid using adhesive labels to identify your CDs or DVDs. Adhesive labels may damage the optical drive if they come

off while the disc is in the drive.

To insert a disc

1.

Turn on the computer or exit a power saving mode (Standby or Hibernate) if one is active. For more information,
see

Using power saving modes.

2.

Press the drive eject button to open the drive tray.

There are two drive eject buttons: one on the cover of the optical drive and one next to the optical drive. Use the

drive eject button located next to the optical drive to open the optical drive tray.

Opening the Driv e Tray

3.

When the drive tray slides out, place a disc on the drive tray with the label facing up.

You can play some DVDs on both sides. Insert this type of DVD with the side you want to play facing up.

Inserting a Disc

4.

Press the disc onto the tray until the disc clicks securely into place.

If you do not seat the disc firmly over the hub, the disc may come loose while it is in the drive. A loose

disc may damage the optical drive and make opening the drive tray difficult.

5.

Push the drive tray gently to close it. The Busy indicator on the drive cover blinks while your computer is reading
data from the drive.

To eject a disc

1.

Turn on the computer or exit a power saving mode (Standby or Hibernate) if one is active. For more information,
see

Using power saving modes.

Page 90

Advertising
This manual is related to the following products: