Sony MZ-R90 - Manual (Page 37)

37
Storing phrases
frequently used in
labeling
(Phrase Bank)
Phrases that you often use in track or disc
labeling can be stored in the recorder’s
memory. There are two ways to store
phrases: storing a phrase while
performing the labeling procedure, or
storing a phase using the EDIT menu.
Approximately 40 phrases of about 10
characters each (with a total character
count of about 600) can be stored in the
phrase bank. The actual number will
depend on the length of each phrases.
On the recorder
Storing phrases while labeling
a track or disc
1
Do the procedure “Labeling
recordings” (page 34) to enter a
phrase.
2
After entering the phrase, press X for
2 seconds or more.
“Entry!” appears in the display and
the cursor flashes after the phrase you
just stored. You can then continue
with labeling operation.
z
You can store phrases from a previously labeled
track or disc.
Do the procedure “Relabeling recordings”
(page 36) and display the track or disc name
that contains the phrase that you want to store.
Press VOL +/– repeatedly to move the cursor to
the right of the phrase. Then press X for 2
seconds or more to store the phrase.
Storing phrases using the EDIT
menu
1
Press the jog lever so that “EDIT”
flashes in the display, and then press
the lever again.
2
Flip the jog lever until “Name Bank”
flashes in the display, and then press
the jog lever.
3
Enter the phrase you want to store,
and then press the jog lever for 2
seconds or more.
“Entry” appears in the display and the
phrase is stored.
Retrieving phrases stored in
the phrase bank
You can retrieve a phrase stored in the
phrase bank anytime you want to use it in
a track or disc name.
There are two ways to retrieve a stored
phrase: by displaying the stored phrases
one by one during the labeling procedure,
or by searching the phrase bank by the
first letter of the desired phrase.
Searching for a phrase by displaying
the stored phrase one by one
1
Do the procedure “Labeling
recordings” (page 34) until
“
: Name” or “ : Name”
flashes in the display. Then press the
jog lever.
2
Press X repeatedly until the first
phrase stored in the phrase bank
appears in the display.
Jog lever
N
X
. />
continued