Sony MZ-R90 - Manual (Page 39)

39
Storing phrases using the EDIT
menu
1
Press DISPLAY for 2 seconds or
more.
2
Press the control towards . or
towards N • > repeatedly until
“Name Bank” flashes in the display,
and then press x.
3
Enter the phrase you want to store,
then press x for 2 seconds or more.
“Entry” appears in the display and the
phrase is stored.
Retrieving phrases stored in
the phrase bank
Searching for a phrase by displaying
the stored phrase one by one
1
Do the procedure “On the remote
control” in “Labeling recordings”
(page 35) until “
: Name” or
“ : Name appears in the display.
Then press x.
2
Press X repeatedly until the first
phrase stored in the phrase bank
appears in the display.
3
Press the control towards . or
towards N • > repeatedly.
Pressing the control towards . or
towards N • > causes the phrases
stored in the phrase bank to appear
one by one. If you press X at this
time, the first phrase stored in the
phrase bank retrieved.
4
Press x while the phrase you want is
shown in the display.
The cursor flashes after the phrase
you just retrieved. You can then
continue with labeling operation.
Searching by the first letter of a
phrase
1
When labeling a track or disc, use
VOL +/– to move the cursor to the
letter which the desired phrase begins
with.
2
Press X to search.
The phrase for that letter appears in
the display. If there are two or more
phrases that start with that letter, press
X to see the next phrase.
3
Press x while the phrase you want is
shown in the display.
The cursor flashes after the phrase
you just retrieved. You can then
continue with labeling operation.
Erasing phrases
You can erase phrases from the phrase
bank while the recorder is stopped. You
can also erase phrases when the recorder
is empty.
1
Press DISPLAY for 2 seconds or
more.
2
Press the control towards . or
towards N • > repeatedly until
“BankErase” appears in the display,
and then press x.
3
Press the control towards . or
towards N • > repeatedly until
the phrase you want to erase appears,
and then press x.
“Erase!” appears in the display and
the phrase is erased.
If there is no phrase stored in the
phrase bank, “EMPTY” appears in
the display.
To cancel the operation, press
DISPLAY for 2 seconds or more.