Power sources – Sony MZ-R90 User Manual

Page 40

Advertising
background image

40

Power sources

You can use the recorder on house current
or as follows.
In the recorder …

— a nickel metal hydride rechargeable

battery NH-14WM (supplied)

With supplied battery case …

— LR6 (size AA) alkaline battery (not

supplied)

It is preferable to use the recorder on
house current when recording for a long
time.

Charging the nickel
metal hydride
rechargeable battery

Before using the supplied NH-14WM
nickel metal hydride rechargeable battery
for the first time, charge it in the recorder.

1

Connect the supplied AC power
adaptor.

2

Insert the NH-14WM into the
recorder and close the lid.

3

Press x.
“Charging” flashes, e appears in
the display, and charging starts.

Full charging of a completely
discharged rechargeable battery takes
about 3 hours. To cancel charging,
press x.

Notes

If you press x/CHARGE immediately after

charging has completed, charging will begin
again, even though the battery is already fully
charged.

Charging stops when you try to operate the

recorder during charging.

B

e sure to use the supplied AC power adaptor.

Charging time may vary depending on the

battery condition.

When a rechargeable battery is charged for the

first time or charged after a long period of
disuse, battery life may be shorter than usual.
Repeat discharging and recharging a few
times. The battery life should return to
normal.

When the battery life of a fully charged

rechargeable battery becomes about half the
normal life, replace it.

to wall output

to DC IN 3V

AC power adaptor
(supplied)

e

E

x

Advertising