On the remote control, Connecting to a stereo system (line out) – Sony MZ-R900 User Manual

Page 41

Advertising
background image

41

-GB

On the remote control

1

Press DISPLAY while playing.
Each time you press DISPLAY, the
display changes as follows.

Display window on the remote control

Indication C/D

Track number/Elapsed time
r
Track number/Track name

1)

r
The number of tracks in the disc/
Disc name

1)

r
— /Recorded time

2)

1)

Appears only if the track has been labeled.

2)

Appears only when the clock is set.

z

• If you want to check the remaining time or the

recording position while recording or in stop
mode, see page 29.

• The display that appears on the recorder is

different from the ones on the remote control.
See “ On the recorder” (page 40) to check the
display that appears on the recorder.

Connecting to a stereo
system (LINE OUT)

Connect the i/LINE OUT jack of the
recorder to the LINE IN jacks of an
amplifier or a tape player with a line
cable. For more information on line
cables, see “ Optional accessories”
(page 6
8). The output is analog. The
recorder plays the MD digitally and sends
analog signals to the connected
equipment.

When connecting a line cable to the i/
LINE OUT jack of the recorder, be sure to
set the “ AUDIO OUT” parameter for the
i

/LINE OUT jack.

1

Press the jog lever (L), flip the lever
until “ AUDIO OUT” flashes in the
display, and then press the lever
again.

2

Flip the jog lever (L) until “ LINE
OUT” flashes in the display, and then
press the lever.

DISPLAY

C

D

Portable DAT
recorder

Stereo system,
etc.

to LINE IN

2 phono plugs

L
(white)

Stereo mini-plug

R
(red)

RK-
G136

to i/LINE OUT

RK-
G129

Jog lever (L)

Advertising