Sony MEX-DV2200 - Manual (Page 48)

48
SOUND
*1 Unavailable during karaoke mode or when “SA-CD MOD” is set to “HQ.”
*2 Appears and available only when “DVD-LVL” is set to “ADJUST ON.”
Item Option Purpose Unit status
EQ7 TUNE (page 39) – – During playback* 1 /
radio reception.
AUX-LVL (AUX Level)
(page 50) (–6 ~ +18 dB)
z: 0 To select the level. During AUX
playback.
DVD-LVL (DVD Level)
(page 26) ADJUST ON To allow for adjusting the
output level of Dolby
Digital and DTS format
separately.
During disc
playback.
ADJUST OFF
(z) To deactivate the level
adjustment.
DOLBY ADJ (Dolby Level
Adjust) (page 26)*
2
(–10 ~ +10 dB)
z: +8 To select the level.
DTS ADJ (DTS Level Adjust)
(page 26)*
2
(–10 ~ +10 dB)
z: +4 To select the level.
SP SETUP (Speaker Setup)
(page 40) CENTER
(Center Spekaer
Setup) (page 40) To set the connection status
(ON, OFF).
Unit off.
SUB (Subwoofer
Setup) (page 40) To set the connection status
(ON, OFF).
LEVEL ADJ
(Level Adjust)
(page 40) To select the level (–6 ~ +6,
13 steps).
HPF (High Pass
Filter) To select the front/rear
speaker cut-off frequency
(OFF (z), 80HZ, 120HZ).
During
playback*
1 /radio
reception.
LPF (Low Pass
Filter) To select the subwoofer
cut-off frequency (120HZ
(z), 80HZ).
POS TUNE
(Position Tune)
(page 39) To set the listining position
(0 ~ 400 cm (0 and
13
1
/ 10 ft)).
Unit off.
DISC.LAYER (page 34)
Selects the playback layer
(area) of a Super Audio CD.
MLT (z) To play multi-channel area
in the Super Audio CD
layer.
2CH To play 2-channel (stereo)
area in the Super Audio CD
layer.
CD To play CD playback layer
(if contained).
SA-CD MOD (page 35)
Selects the sound quality for
Super Audio CD playback.
HQ (z) To have high sound quality.
STD To have standard sound
quality.