AT&T 1772 - Manual (Page 3)

3 Plug the cord from the L2 jack on the
system into the dual outlet adapter.
4 Plug the dual adapter into the Line 2 jack.
For two-line phone with two cords and
a single jack adapter
(requires a single jack adapter)
1 Plug the single jack adapter into the dual
outlet adapter.
2 Plug the cords from the phone into the
single jack adapter.
3 Plug the cord from the L1 OR L1/L2
jack on the answering system into the
dual outlet adapter.
4 Plug the dual outlet adapter into the wall
jack.
CONNECTING THE POWER CORD
Use only the power cord supplied
with your system. If you need a
replacement cord, call 1 800 722-9125.
Fit the power cord behind the strain relief
tab. Then plug the smaller end of the power
cord into the POWER jack at the back of
the system. Plug the other end of the power
cord into an electrical outlet that is not
controlled by a wall switch.
SETTING THE CLOCK
1 Press
G. The Message Window
displays CH.
2 Press
C. You hear a day, and the
Window displays a number (1-7 for
Sunday - Saturday).
3 Hold down
F or R until the
correct day is displayed, then release.
4 Press
C. You hear an hour, and the
Window displays it.
5 Hold down
F or R until the
correct hour is displayed, then release.
6 Press
C. You hear a minutes setting,
and the Window displays it.
7 Hold down
F or R until the
correct minutes setting is displayed, then
release.
8 Press
C. The system announces the
new day and time setting.
To review the setting, press
C.
I N S T A L L A T I O N
!
ine Wall Jacks For Two-Line Phone with Two Cords For Two Single-Line Phones
Power cord
Line 2 jack
ck
e with
d
L2 jack
Power cord
L2 jack
Line 1 jack
L1 OR L1/L2 jack
TEL SET jack
Two single-line phones
Line 2 jack
with dual
outlet adapter
L1 OR L1/L2 jack
Power cord
Two-line jack with
single jack adapter and
dual outlet adapter
Two-line phone with
two cords