Panasonic TYST20K - Manual (Page 10)

10
Components
Check that all the parts are accounted for and present in their designated quantities.
Stand base (1)
Clamper (1)
Stand pole (One for each side, L(left) and R(right))
Unit installation screw (4) Stand pole installation screw (4)
M5X14 M5X30
Overturn-prevention parts
Assembly Procedure
1. Assemble the Pedestal
● Make sure you do not scratch the surface of the
stand base.
Align stand base with the stand poles on
the left and right sides, and use the stand pole
installation screws
(4 screws) to
attach the stand poles as shown in the
diagram.
(Tightening torque: 1.5 to 1.8 N•m)
① Overturn-prevention belt (2) ② Screw (2) ③ Wood screw (2)
R
L
Stand pole installation
screw
Stand pole L
Stand pole R
Stand base
English
[ The images shown in this manual are for illustrative purpose only.]