Avaya 3.7 - Manual (Page 124)

Configuring remote access users
124 Avaya VPNmanager Configuration Guide Release 3.7
RADIUS/ACE Services
(VPNos 3.x and VPNos 4.31 only)
Note:
Note:
If a RADIUS server is used, the name assigned to a VPNremote Client must be
identical to the one used in the RADIUS server.
A popular tool for managing authentication and accounting for remote access has been Remote
Authentication Dial-In User Service (RADIUS). Use the Policy Manager for RADIUS/ACE if you
want to use one or more RADIUS servers to authenticate remote users. A security gateway can
query up to three RADIUS servers, where two of the servers is recognized as backups.
Figure 42: The Policy Manager for RADIUS/ACE
Note:
Note:
The security gateway must authenticate itself to the RADIUS server with a
“shared secret” before they can exchange information. Therefore, the RADIUS
server must be configured with a shared secret for the security gateway.
Enable RADIUS/ACE
When checked, RADIUS is enabled as the authentication and configuration database.
# - Rank in group of this particular RADIUS server.
IP Address - IP Address of the RADIUS server.
UDP Port - UDP port of the RADIUS server. The default value is 1645.