Options for ip addressing for interface zones, Static addressing, Dhcp addressing – Avaya 3.7 User Manual

Page 70

Advertising
background image

Setting up the network

70 Avaya VPNmanager Configuration Guide Release 3.7

Options for IP addressing for interface zones

You can configure each zone with different addressing options and the private port can be
configured as a DHCP server or DHCP relay used to obtain IP addresses from the DHCP
server (

Table 7

). This section explains the options in detail.

* The DHCP Client for the private zone is for SG5/5X/200 and VSU5/5X/500 bootcode only.

Static addressing

Use static addressing if a dedicated IP address should be assigned to the public interface of the
security gateway. To configure static addressing, complete the following information:

DHCP addressing

Use DHCP addressing if the gateway obtains its IP address dynamically from the internet
service provider (ISP). This can be configured for public-backup.

Table 7: Type of IP addressing available by zone

Public

Private

Public-backup

Semi-private

DMZ

Manage-ment

Address assigned

Static

X

X

X

X

X

X

DHCP Client

X

X*

X

PPPoE

X

X

Server modes

Static

X

X

X

X

DHCP Server

X

X

X

DHCP Relay

X

X

H.323

X

X

X

X

Field Description

IP Address

The public IP address that is assigned
to the security gateway

Network Mask

The subnet mask

Route

The IP address of the gateway router
to the Internet

Advertising