Avaya 3.7 - Manual (Page 291)

Device - Upgrade tab
Issue 4 May 2005 291
Use the License button to upload the licenses from the VPNmanager Console.
Once you have received the license file from your sales representative, upload the
license file to the security gateway as follows:
1. Save the license file to a directory on the computer.
2. From the security gateway object Upgrade tab, click License.
3. Navigate to the directory where the license was saved and select the license file. Click
Open.
4. Choose the security gateway for which the license needs to be updated. Click OK. The
license is uploaded to the security gateway and the status of the upload is shown.
Encryption Strength
This button launches the Encryption Strength screen through which DES or 3DES encryption
can be activated. When initially launched, the security gateway is polled for the current status of
this feature, which is displayed on the first line (DES or 3DES). Click on the radio button for the
desired encryption method. Click OK after you have selected the encryption.
Note:
Note:
You are required to enter a valid license registration number to activate this
option. Should you miskey the number, a “Registration number invalid” message
appears. Other error messages may also appear if the security gateway is not
reachable.
Remote Access (VSU-100 Only)
While the VSU-100 is designed for site-to-site operation, theVSU100R is provided with
additional functionality to support dial-in VPNremote clients. To use this facility, Remote Access
must be enabled.
Note:
Note:
You are required to enter a valid license registration number to activate this
option. Should you miskey the number, a “Registration number invalid” message
appears. Other error messages may also appear if the VSU is not reachable.