Avaya 3.7 - Manual (Page 59)

Using Device tabs to configure the security gateway
Issue 4 May 2005 59
13. Click Finish to save the configuration information to the directory serve, to poll security
gateway, and to exit the Setup Wizard.
When you want to send configurations to one or more security gateway, click Update Devices
from the Configuration Console window or use the Action tab to send the configuration to the
security gateway.
Using Device tabs to configure the security gateway
After the security gateway is set up, the VPNmanager displays the tabs you can use to make
changes to the security gateway configuration.
This section describes the features to configure a basic device. See Establishing security and
Using advanced features for a description of the other tabs that can be configured.
The tabs displayed are dependent on the VPNos release for the device. Table 5 lists the tabs by
release.
Table 5: Device tabs by release
Tab All VPNos
Releases VPNos
4.0 and
earlier VPNos
4.2 and
later VPNos
4.3 and
later VPNos
4.4 and
later VPNos
4.5 and
later VPNos
4.6
Actions X
Advanced X
Advanced
Action X
Connectivity X
Denial of
Service X
Device
Users X
Diagnostics X
Directory
Servers X
DNS X
Failover
TEP X X
1 of 2