Alliance Laundry Systems SF18VNV - Manual (Page 30)

Installation
28 F232060 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Chemical Injection Supply
System Undiluted chemical dripping can damage the
machine. Therefore, all chemical supply
dispenser pumps should be mounted below the
washer’s injection point. All dispenser tubing
should also run below the injection point.
Loops do not prevent drips if these instructions
are not followed. Failure to follow these
instructions could damage the machine and
void the warranty. Figure 10 shows a
typical chemical injection supply system.
Figure 10
Wear eye and hand protection when
handling chemicals; always avoid direct
contact with raw chemicals. Read the
manufacturer’s directions for accidental
contact before handling chemicals. Ensure
an eye-rinse facility and an emergency
shower are within easy reach. Check at
regular intervals for chemical leaks.
SW016
WARNING
B009RE3A
Injection
Point
Chemical Dispenser
Pump Outlet
PVC
Pipe